Ground penetrating radar VIY-2

VIY-2 ground penetrating radar (GPR) with unique sounding possibilities and use simplicity is presented at this paper. VIY-2 GPR combines all units (synchronizer, transmitting and receiving modules, powering, and antenna system) into single case. The VIY-2 GPR communicates with computer via standard interface RS232 or USB1.0. Technical solutions utilized by the VIY-2 GPR reduce deployment time and simplify surveying process. The VIY-2 GPR design features and its components interaction are considered at this paper. Some field results are also presented here. The VIY-2 GPR design concept allows reducing the data acquisition time,, optimizing the time-varying gain control function, applying depth-stacking dependence, controlling the surveying window position and interference reducing by pulse repetition frequency randomizing.     

Small-Signal Model for the Series Resonant Converter

The results of a previous discrete-time model of the series resonant dc-dc converter are reviewed and from these a small signal dynamic model is derived. This model is valid for low frequencies and is based on the modulation of the diode conduction angle for control. The basic converter is modeled separately from its output filter to facilitate the use of these results for design purposes. Experimental results are presented.     

Tapped-inductor filter assisted soft-switching PWM DC-DC power converter

A novel high-frequency transformer linked full-bridge type soft-switching phase-shift pulsewidth modulated (PWM) controlled dc-dc power converter is presented, which can be used as a power conditioner for small-scale photovoltaic and fuel cell power generation systems as well as isolated boost dc-dc power converter for automotive ac power supply. In these applications with low-voltage large-current sources, the full-bridge circuit is the most attractive topology due to the possibility of using low-voltage high-performance metal-oxide-semiconductor field-effect transistor (MOSFET) and achieving high efficiency of the dc-dc power converter. A tapped-inductor filter including the freewheeling diode is newly implemented in the output stage of the full-bridge phase-shift PWM dc-dc converter to achieve soft-switching operation for the wide load variation range. Moreover, in the proposed converter circuit, the circulating current is effectively minimized without using additional resonant circuit and auxiliary power switching devices. The practical effectiveness of the proposed soft-switching dc-dc power converter was verified in laboratory level experiment with 1 kW 100 kHz breadboard setup using power MOSFETs. Actual efficiency of 94-97% was obtained for the wide duty cycle and load variation ranges.     

Late Stages of Stellar Evolution

A large fraction of ISO observing time was used to study the late stages of stellar evolution. Many molecular and solid state features, including crystalline silicates and the rotational lines of water vapour, were detected for the first time in the spectra of (post-)Asymptotic Giant Branch (AGB) stars. Their analysis has greatly improved our knowledge of stellar atmospheres and circumstellar environments. A surprising number of objects, particularly young planetary nebulae with Wolf-Rayet (WR) central stars, were found to exhibit emission features in their ISO spectra that are characteristic of both oxygen-rich and carbon-rich dust species, while far-IR observations of the PDR around NGC 7027 led to the first detections of the rotational line spectra of CH and CH⁺. Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands, and the United Kingdom), and with the participation of ISAS and NASA.     

Fiber-optic radar calibration

A simple fiber-optic radar calibration target is described. Its operation is based on a wideband fiber, a laser transmitter that is directly modulated by the down-converted radar signal and an optical diode receiver recovering said signal. Further up-conversion having a common local oscillator with the first mixer ensures fidelity of the calibration return. Measured useful bandwidth exceeds 200 MHz and practically any radar RF frequency can be handled when suitable mixers are employed. Amplifiers can be added to the down-converted path as desired to compensate for the fiber loss. Modulation and LO sweep provide easy ways of introducing artificial fluctuations and Doppler frequencies. Particularly pulsed radars are readily tested with the proposed scheme as no restrictions are posed by the radar's TR-switch delays.     

Analysis of the Integrity of the Microwave Landing System (MLS) Data Eu nctions

The microwave landing system (MLS) transmits angle, data, andrange information for use by airborne receivers. In this paper, theintegrity of the data functions is analyzed in terms of the probabilityof undetected errors remaining in the data. The data format andintegrity requirements were derived from the MLS standards andguidance material defined by the International Civil Aviation Organization (ICAO). Results show that the performancerequirements can be met by: 1) averaging the received data bits ofseveral samples of the same word using a majority voting;2) reducing the bit error rate at the output of the receiver'sdecoder; and 3) a combination of the above techniques.     

Shuttle performance improvements through multiple database integration

The ability to model and analyze system performance is a key enabler when you are extending the operational life of complex systems. This is especially true when the system is operating in a hostile environment, such as space. This paper discusses a change made to the Space Shuttle main engines (SSMES) that affected the solid rocket booster (SRB) performance, and illustrates how databases maintained by the different subsystem contractors can be integrated, correlated, and evaluated to improve a subsystem component performance model. The enhanced model can be used not only for better prediction of component performance on the existing system, but can be used on upgrades to the system, or the next generation space shuttle solid rocket. motor.     

Detection of microlesions induced by heavy ions using liposomes filled with fluorescent dye.

In cells irradiation by heavy ions has been hypothesized to produce microlesions, regions of local damage. In cell membranes this damage is thought to manifest itself in the form of holes. The primary evidence for microlesions comes from morphological studies of cell membranes, but this evidence is still controversial, especially since holes also have been observed in membranes of normal, nonirradiated, cells. However, it is possible that damage not associated with histologically discernable disruptions may still occur. In order to resolve this issue, we developed a system for detecting microlesions based on liposomes filled with fluorescent dye. We hypothesized that if microlesions form in these liposomes as the result of irradiation, then the entrapped dye will leak out into the surrounding medium in a measurable way. Polypropylene vials containing suspensions of vesicles composed of either dipalmitoyl phosphatidylcholine, or a combination of egg phosphatidylcholine and cholesterol were irradiated at the Brookhaven National Laboratory using 56Fe ions at 1 GeV/amu. In several cases we obtained a significant loss of the entrapped dye above the background level. Our results suggest that holes may form in liposomes as the result of heavy ion irradiation, and that these holes are large enough to allow leakage of cell internal contents that are at least as large as a 1 nm diameter calcein molecule.